NEC DS 1000 / 2000 user guide
- Making & Answering Calls
- To call a station
- Lift Handset Press ICM Button & Dial Ext. Number or Press
DSS Key.
- To make an outside call
- Lift Handset Select Outside Line and Dial Number.
- To Answer a Call
- Lift The Handset Press The Flashing Line Key.
- To Transfer a Call
Do Not Hang Up, Press ICM Dial Ext. Number or Press DSS
Key and Hang-up.
- Call Forward
- To
Call Forward Your Phone
- Press ICM Button and Dial ( * ) 3 AND Dial The
- Call Forward Type.
- 0 = Cancel Forwarding
- 2 = Busy / No Answer
- 4 = Immediate
- 6 = No Answer
- 7 = Personal Answer Machine Emulation
Dial Destination Ext. or Press MW
- To Forward To Voice Mail, Press SPK or Hang Up.
- Example: (Call Fwd no answer calls to VM)
- ICM * 36 MW & hang up.
- Paging
- Press ICM Button Dial ( * ) 1 0 or
- Press PAGE Button Dial Page Zone
- Number or Press All (for all call page )
- Page Zones are 1-7 or 0 For All.
- Conference Calls
Place 1st Call and Press Conf Button
- Place 2nd Call and Press Conf Button
- Speed Dial
- To Program System Speed Dial (from ext 300)
- Press ( # 7 7 ). and Dial the System Bin Number (normally
200-299 ) Press HOLD. Enter the Line Number You Want the
System to use when dialing Your Number ( 1 for line 1 ) or Enter the
Line Group You Want the System to Dial Out on
- ( 90 for group 0 ) Press HOLD. Enter the Number to be
Stored ( up to 16 digits long ) Press HOLD.
- EXAMPLE: (To store Global in bin 200)
- Dial # 77 200 Hold 90 Hold 1-561-368-3030 Hold
-
- To Dial a System Speed Dial Number
- Press ICM Button and Dial # & System Bin Number (
200-299 )
- To Program Personal Speed Dial
- Press ( # 7 7 ) + SPD. Dial Bin Number ( normally
701-720 ) or Press Personal Speed Dial Key ( for bins 1-10 ) or
Press DIAL + a Personal Speed Dial Key ( for bins 11-20 )
Press HOLD. Enter Line Number You Want the System to use When
Dialing Your Speed Dial Number ( 1 for line 1 ). or Enter Line Group
Number ( 90 for group 1 ). Press HOLD. Enter the Number
you Want to Store ( up to 16 Digits ). Press HOLD .
-
- To Dial Personal Speed Dial Number
- Press ICM and Press Personal Speed Dial Key ( for bins
1-10 ). Or Press DIAL + a Personal Speed Dial Key ( for
bins 11-21 ). or Press a Programmable
- Function Key for System Speed Dial Bins.
- To directory dial system speed numbers
- Dial 32 and press the first letter on your keypad (G=4 Y=9) to scroll
through the directory use the volume up and down key when you see your party’s
mane press dial.
- To program your phone for headset
- Dial #47 & 9 to turn on and 6 to turn off.
-